Cracked firebrick, crumbling joints and damaged hearths repaired with materials made for heat.
★★★★★5.0 Rated on GoogleThe inside of a firebox lives a hard life. It goes from room temperature to several hundred degrees and back every time you light a fire. Over the years the firebrick cracks and the joints between them burn out, and that leaves a path for heat to reach the framing behind the fireplace.
Fireplace repair uses different materials from the rest of the chimney. Ordinary mortar turns to powder in a firebox. We use firebrick and refractory mortar, which are made to take the heat.
Cougar Masonry handles fireplace repair in Wooster, Orrville and across Wayne County as part of our chimney services. We are a licensed and insured masonry contractor based in Orrville.
Cracked firebrick, crumbling mortar and damaged hearths repaired with refractory materials made for heat. We handle the masonry and work with your sweep or hearth installer on liners and inserts.
If the damage goes past the firebox into the flue liner, that needs a camera inspection by a chimney sweep before anyone lights a fire. We will tell you when that is the case and work alongside your sweep on the masonry side.
Plenty of homes in Wooster, Orrville and Wadsworth have fireplaces that have burned every winter for fifty years or more without the firebox ever being looked at. If you have just bought an older house, have the firebox checked before the first fire. We also repair fireplaces in Ashland and Medina.
Hairline cracks are common and usually not urgent. Open gaps, loose brick or missing mortar should be repaired before the fireplace is used, because heat can reach what is behind the firebox.
Yes. We can lay stone veneer over sound brick, rebuild the hearth and set a new mantel, which changes the whole room.
Refractory mortar needs to cure, often a few days, and the first fires should be small. We give you the timing for the product we used.
Get your free, no obligation estimate today.
