Worn mortar joints ground out and repacked with matched mortar, which stops the leak and buys the chimney decades.
★★★★★5.0 Rated on GoogleMortar is meant to wear out before the brick does. On a chimney that happens faster than anywhere else on the house, because the stack is wet on all four sides and has nothing to shelter it. When the joints recede, every rain soaks the core.
Tuckpointing puts those joints back. We grind the old mortar out to a proper depth, clean the joint and pack it with new mortar in layers. Done on time, it is the least expensive way to keep a chimney standing.
Cougar Masonry handles chimney tuckpointing in Wooster, Orrville and across Wayne County as part of our chimney services. We are a licensed and insured masonry contractor based in Orrville.
Chimneys take more weather than any other part of the house. We grind out failed mortar joints and repoint them with matched mortar, which stops leaks and adds years before a rebuild is needed.
New joints do nothing for brick that has already lost its face, and they will not straighten a chimney that has started to lean. If we get up there and find the brick is the problem, we stop and show you before going further.
On older homes in Wooster and Orrville the original mortar is soft and lime rich. Repointing it with a hard modern mix traps water in the brick and breaks the faces off, which is why so many old chimneys here look worse after a cheap repair. We choose the mortar to suit the brick. We repoint chimneys in Smithville, Creston and Doylestown as well.
Properly ground out and packed joints commonly last 25 years or more. Surface patching over old mortar lasts a few seasons.
In everyday use around here, yes. Both mean removing failed mortar from the joints and replacing it.
It depends on the wear. If one side takes the weather we can do that side. If the joints are failing all around, doing the full stack once costs less than coming back.
Get your free, no obligation estimate today.
